Halo Reach EOD Helmet

[Sixty]

So I made the EOD helmet from Halo Reach not too long ago. Since I was bored, I also made the Magnum.

Both are made from nothing but cardboard and duct tape. I used Kleenex as padding for the inside of the helmet. Fits like a glove.

[spoiler=Helmet and Magnum]
[IMG]http://i51.tinypic.com/9r5dhw.jpg[/IMG]
[IMG]http://i53.tinypic.com/8x6c8h.jpg[/IMG]
[IMG]http://i53.tinypic.com/1to513.jpg[/IMG]
[IMG]http://i51.tinypic.com/hv18yf.jpg[/IMG]
[/spoiler]

[-DG-]

Not bad. Missing some details, plus I wouldn't use duct tape, but, still, not the worst I've seen

[Sixty]

[quote name='PzYchotic -DG-' timestamp='1288047618' post='4736893']
Not bad. Missing some details, plus I wouldn't use duct tape, but, still, not the worst I've seen
[/quote]

What else should I use?

[-DG-]

[quote name='Sixty3Zero' timestamp='1288222023' post='4743308']
What else should I use?
[/quote]


Plaster molding and fiber glass resin is what most use At least, the ones that are movie-quality.

[Sixty]

[quote name='PzYchotic -DG-' timestamp='1288300047' post='4745449']
Plaster molding and fiber glass resin is what most use At least, the ones that are movie-quality.
[/quote]

I'm sure duct tape's still cheaper. Even if they sell colored rolls with a diameter of two inches for four dollars. Outrageous, I could go to the city and get a roll of colored that's four inches in diameter for three.