Skippy Canoe Posted August 19, 2009 Report Share Posted August 19, 2009 I decided to throw together this simple, but helpful tutorial. This will help people that do not know how to install Playing Mats and Card Sleeves into YVD. I decided to put it here, since you may also see tutorials in this forum on how to make YVD GFX. I recommend that you back up your original Playing Field and Card Sleeves. [spoiler=How to Install YVD Playing Fields]Your field should be a jpg. 1 - Save your custom YVD Playing Field in a folder you'll remember.2 - Start up YVD.3 - Press "Settings" in the upper left corner of the window.4 - Find the line titled "Playfield" and press "Browse."5 - Locate the Playing Field and press "Open."6 - Press "Duel" in the lower right corner. If your field is new, you're done! [spoiler=How to Install YVD Card Sleeves]Make sure your sleeves are saved as "back.gif" and "hback.gif" and that they are 55x80 and 80x55. 1 - Open your "My Computer" folder. Make sure your custom sleeves are on your clipboard, or copied.2 - Go to your Local Disk, which in my case is C.3 - Go to Program Files -> Yugioh Virtual Dueling -> Images4 - Select both of the sleeves in the image folder, then paste your custom sleeves in place of them.5 - Press "Duel" in the lower left corner of the window.6 - Set a card face-down. If your card sleeves look different, you're done! I really don't expect reps, as this is a simple tutorial. They still are appreciated, and so are comments! ^.^ Link to comment Share on other sites More sharing options...
.Leo Posted August 19, 2009 Report Share Posted August 19, 2009 it looks pretty easy to follow. i don't have YVD so can't try it. if i did have YVD i would try it Link to comment Share on other sites More sharing options...
Skippy Canoe Posted August 19, 2009 Author Report Share Posted August 19, 2009 Thanks! Link to comment Share on other sites More sharing options...
Skippy Canoe Posted August 20, 2009 Author Report Share Posted August 20, 2009 BUMP Link to comment Share on other sites More sharing options...
General Assclown Posted August 21, 2009 Report Share Posted August 21, 2009 I tried doing the Custom Playfield and it doesn't work. It stays as the same old crappy blue and orange one. Any suggestions? Also, I'll have to give the Card Sleeves a go. Do they have to be a specific size? Link to comment Share on other sites More sharing options...
Skippy Canoe Posted August 21, 2009 Author Report Share Posted August 21, 2009 Hmm... Yes, the sleeves have to be 55x80 for vertical, and 80x55 for horizontal. As for the field, is your field a jpg? Link to comment Share on other sites More sharing options...
Mehmani Posted August 25, 2009 Report Share Posted August 25, 2009 It would better if this was a tut for making YVD Sleeves and Playing Fields. Though it really helps. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.